Luminescent paints with afterglow
When storing the energy of light during the daytime or accumulating it in the artificial illumination, the image applied with a luminescent paint starts to glow in the darkness or after switching off light and it gives up all the stored energy. The technology developed by the specialists of "RPF "Luminophor" Corp." allows to achieve the afterglow time up to 6-10 hours.
“Glow” or luminescence is determined by the intensity and the time during which the product remains to be exposed to light. This property depends on the paint composition, intensity and the light exposure time and also on the adaptation of a man looking at the object in the darkness.
Application:
-
painting of separate details; applying signal lines and signs on the auto-, railway transport, crafts and helicopters;
-
painting navigation equipment, beacons, buoys, road signs;
-
marking hazardous areas of technological lines, fire equipment;
-
indoor and outdoor advertising;
-
design of souvenir and New year products;
-
painting wall panels and buildings elements,
- decoration of offices, shop-windows etc.
production based on phosphor of "RPF "Luminofor" Corp.production:
A view of the watch under daylight A view of watch face in the darkness
phosphor FV-490D was used
A view of the diver's watch under daylight A view of watch face in the darkness
phosphor FV-530D was used
|
A view of luminescent paint coating at the light and in the darkness |
|
|
A view of luminescent paint coating at the light |
A view of luminescent paint coating in the darkness |
|
|
|
|
Advantages
The paints are produced on the base of inorganic phosphors manufactured at the "RPF “Luminophor” own production capacity. Therefore, they have increased afterglow brightness, resistance to light and thermostability.
Operation condition
The paints of AC type based on acrylic polymers have been developed for indoor works. The rate of full drying is an hour and a half.
We have developed the weatherproof paints of DS type based on epoxide resins for outdoor works. The rate of full drying is 24 hours.
Surface preparation: the painted surface must be dry and clean. Before painting the untreated metal surface is cleaned of rust by a metal brush or sandpaper, degreased with acetone or water detergent, and then the surface is thoroughly washed with water and dried. You must use personal protective equipment when applying the paint.
Method of application: with paint sprayer, brush, pouring.
